Bluetooth Mode - Tokai CD-103 Bedienungsanleitung

BLUETOOTH MODE

* The operational range between this unit and a Bluetooth device is approximately 10 meters, different
BLUETOOTH devices may be slightly different operation,
* Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the
device (IPHONE, IPAD, MOBILE PHONE,etc.) by reading the device instructions.
* Compatibility with all Bluetooth devices is not guaranteed.
* Any obstacle between this unit and a Bluetooth device can reduce the operational range.
* Keep this unit away from any other electronic device that may cause interference.
In order to avoid interferences, please de-activate Wi-Fi on your device (Smartphone, tablet, etc...)
when playing music using Bluetooth.
PAIRING YOUR BLUETOOTH DEVICE
Note: Prior to use Bluetooth function, your TOKAI micro system should be paired firstly with your
Bluetooth device (refer to Bluetooth operation of your external device).
Press FUNCTION button and select BLUE mode.
Search BLUETOOTH equipment"CD-103" model for connection.
Enable the Bluetooth function of your Bluetooth audio source device to make it discoverable (see your
device's operation instructions to add or setup a Bluetooth device).
Select CD-103 on your Bluetooth device to make the pairing.
If required by the External Bluetooth audio source, enter default password "0000".
PLAYBACK
1. Press PLAY/PAUSE button to play or pause playback.
2. Push [VOL-] or [VOL +] to adjust the volume level.
3. Press BACK or NEXT to select tracks.
LISTEN TO MUSIC FROM BLUETOOTH EXTERNAL DEVICE
- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music
stored on the external device through the TOKAI CD-103. You can control music via the Micro System.
- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the TOKAI CD-103 remote control
to play music and control playback of the music stored on the external device.
USE AUX
The auxiliary input of your Micro system allows you to connect an external source (such as : mp3 player,
discman, walkman) and play its content through your TOKAI CD-103.
1. Connect your external audio equipment to the AUX IN JACK (12).
2. Press FUNCTION to select AUX. The sound source of the Mp3 or discman or walkman will output from
the unit.
3. Push the volume control to adjust the Volume.
Note: The unit cannot control the player.
29