Berger & Schroter MG983G-30M Bedienungsanleitung Seite 50

Code Meaning
3939 Failed to open
3941 network;
3942 Network not
deactivated;
Network error
-85 Not enough balance
in SIM card;
MMS setting error;
Other error code
Description
Possible cause:
1. The GSM network is not good or not well
covered with the GPRS network.
2. The instability in signal transmission leads
to some MMS setting parameters missing when the
GSM base station do the data analysis. If for the
incorrect transmission reason, the camera may show
various error code.
Suggestion:
1. Contact the network provider if the GPRS network is
well covered in that area.
2. Change a place to try again. It's better to try in a
public place, where there is always good signal.
3. If the provider said there is GPRS signal covered but
the signal is weak, you can try to use a enhanced
antenna that is SMA type with antenna gain of 10db.
Possible cause:
1. The SIM card is not enough balance.
2. Not correct settings.
3.The GSM network is not good leading to a timeout
problem (very small probability).
Suggestion:
1.Please check to make sure your SIM card has enough
balance.
2. Please check the MMS settings
Many codes in the list are used for debugging in the
product design phase. Most of them will not be shown
to consumers, so please ignore the other error codes
and contract us directly. Thanks.
50