Picture Settings; Audio Settings - Grundig GR 42-102 Benutzerhandbuch

PICTURE
Brightness
Contrast
Colour
Sharpness
Vibrant Color Mid
Noise Reduction AUTO
Colour Temp. Normal
Active Contrast On
Backlight Off
Back Exit
SOUND
Volume
Balance
Sound type Stereo
Sound Mode Normal
AVL Off
Equalizer
Headphones
TruSurround XT Off
Back Exit
SETTINGS
­----------------------------------------------------------------------------------------------------
Picture­settings
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Picture« with »
– The »PICTURE« menu appears.
3 Select the line »Brightness«, »Contrast«, »Colour«, »Sharpness«,
»Vibrant Color«, »Noise Reduction«, »Colour Temp.«, »Active
Contrast« (backlighting adjusts according to the picture content
to ensure optimum contrast) or »Backlight« (backlighting for the
LCD screen) with »
Note:
You can only change the backlighting if the »Active Contrast«
function is switched off.
–
4 Press »
« or »
5 Press »i« to finish the settings.
Audio­settings
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Sound« with »
– The »SOUND« menu appears.
Volume
1 Select »Volume« with »
–
+
» « or » «.
Balance
1 Select »Balance« with »
–
+
» « or » «.
Stereo­/­two­channel,­mono
If the device receives two channel programmes, e.g. a film with
the original sound on sound channel B (display: »Dual II«) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1 Select »Sound type« with »
–
+
» « or » «.
« or » « and confirm with »●«.
Λ V
« or » «.
Λ V
+
« to select the level.
« or » « and confirm with »●«.
Λ V
« or » « and adjust the setting with
Λ V
« or » « and adjust the setting with
Λ V
« or » « and adjust the setting with
Λ V
­ 1 3