Pc­monitor­mode; Connecting A Pc; Selecting The Channel Position For The Pc; Settings For The Pc - Grundig GR 42-102 Benutzerhandbuch

CHANNELSETUP
Auto position
H Position
V Position
Clock
Phase
Select
Back
­ 2 8
PC­MONITOR­MODE
Connecting­a­PC
1 Connect the socket »PC-IN« on the television to the corresponding
socket on the PC using a VGA cable.
2 Connect the socket
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting­the­channel­position­for­the­PC
1 Press »AV«, select the »PC« channel with »
»●« to confirm.
Settings­for­the­PC
1 Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2 Select »Channel setup« with »
confirm.
3­
Select the function or setting you want with »
press »
– O ptions:
»Auto position« F or automatic PC configuration;
Exit
»H. Position«
»V. Position«
»Clock«
»Phase«
4 Press »i« to exit the »Channel setup« menu.
Audio« on the television to the
»PC­
–
+
« or » « to execute it.
Adjust the picture position horizontally;
Adjust the picture position vertically;
Set the cycle frequency;
R emove horizontal flicker, blurring and
horizontal lines.
­-----------------------------------------------------------
« or » « and press
Λ V
« or » « and press »●« to
Λ V
« or »
Λ
« and
V