Inhaltsverzeichnis
Werbung
Serial port Header
(9-pin COM1)
(see p.2 No. 25)
HDMI_SPDIF Header
(2-pin HDMI_SPDIF1)
(
see p.2 No. 26)
2.9
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.10 Installing Windows
TM
Vista
64-bit With RAID Functions
If you want to install Windows
RAID disk composed of 2 or more SATA2 HDDs with RAID functions, please follow
below steps.
STEP 1: Set up UEFI.
A.
Enter UEFI SETUP UTILITY
Confi guration.
B.
Set the "SATA Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID confi guration.
Before you start to confi gure RAID function, you need to check the RAID installation
guide in the Support CD for proper confi guration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
26
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
Advanced screen
ASRock FM2A55 Pro Motherboard
This COM1 header supports a
serial port module.
HDMI_SPDIF header, providing
SPDIF audio output to HDMI
VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
TM
/
TM
TM
/ Vista
64-bit on a
Storage
Werbung
Inhaltsverzeichnis
