Weidmuller MCZ CCC 0-Serie Bedienungsanleitung Seite 15

2. Application
MCZ CCC analogue converters can be used for the
galvanic isolation of standard 0(4) ... 20 mA signals.
They are supplied by the measured signal and
require no additional auxiliary supply.
The measured signal is transmitted in a ratio of 1:1.
The connection is realised via tension clamp
terminals.
3. Mounting
Analogue MCZ CCC converters can be mounted
on standard TS 35 rails.
Refer to the following sections for individual
mounting steps.
15