Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
GE EV1000PI-Serie Installationsanleitung
  1. Anleitungen
  2. Marken
  3. GE Anleitungen
  4. Bewegungsmelder
  5. EV1000PI-Serie
  6. Installationsanleitung
GE EV1000PI-Serie Installationsanleitung

GE EV1000PI-Serie Installationsanleitung

Vorschau ausblenden
1
2
3
4
5
6
7
8
Inhaltsverzeichnis

Werbung

Quicklinks

Diese Anleitung herunterladen
EN
FR
NL
!
#
%
DE
IT
Max 35 cm (1 ft.)
Installation instructions
ES
PT
PL
$
EV1012PI
12 m range (39' 4")
www.gesecurity.eu
EV1000PI Series
Revision 2.1 (July 2008)
"
(2' 12")
European representative for manufacture (EMC):
GE Security B.V., Kelvinstraat 7, 6003 DH Weert, The Netherlands.
•
Copyright © 2008 GE Security B.V. All rights reserved
•
Part number 146253999-2A
(7' 10")

Werbung

Inhaltsverzeichnis
loading

Verwandte Anleitungen für GE EV1000PI-Serie

Inhaltszusammenfassung für GE EV1000PI-Serie

  • Seite 1 Max 35 cm (1 ft.) EV1012PI 12 m range (39' 4") (7' 10") (2' 12") European representative for manufacture (EMC): GE Security B.V., Kelvinstraat 7, 6003 DH Weert, The Netherlands. www.gesecurity.eu • Copyright © 2008 GE Security B.V. All rights reserved...

  • Seite 2: Technical Specifications

    EV1000PI Series Installation instructions & Max 35 cm (1 ft.) J1: Not used. LED on. LED off. J3 and J4: See Figure Setting the detector Installation instructions Jumper settings Introduction & See figure for the jumper locations in the detector. The EV1012PI is made up of a PIR motion sensor with pet friendly optics.

  • Seite 3: Instructions D'installation

    EV1000PI Series Installation instructions Current consumption in Alarm (mA) Optique 9 rideaux compatibles animaux de compagnie Max. current consumption (mA) Mémoire Min. 2.3 m, max. 3.0 m Mounting height (Min. 7.55 ft., max. 9.84 ft.) Puissance d’entrée 9 à 15 V cc (12 V nominal) 30 cm/s to 3 m/s (ft./s to 10 ft./s) Ondulation crête à...

  • Seite 4: Technische Specificaties

    EV1000PI Series Installation instructions Technische specificaties LED-Anzeige Detector Ständig Ein Normales Blinken (1 Hz) Signaalverwerking Rote Alarmrelais Zurücksetzen Bereik 12 m (39' 4") Optisch 9 gordijn velden huisdier- Start Geschlossen Automatisch nach 25 Sek. vriendelijke. Geheugen Unterspannung Offen (Alarm) Verwenden Sie die korrekte Spannung Aansluitspanning 9 VDC tot 15 VDC (12 V nominaal)
  • Seite 5 EV1000PI Series Installation instructions J1: non utilizzato Configuración del detector J2: PIR che attiva il LED Configuración de puentes attiva il LED del rivelatore (impostazione di fabbrica). Chiuso: & Consulte la figura para saber dónde están situados los puentes en el mette il LED sotto il controllo della centrale (nessuna Aperto: detector.

  • Seite 6: Parametry Techniczne

    EV1000PI Series Installation instructions Para aplicações em tectos onde seja necessária uma cobertura Umocuj podstawę do ściany na wysokości od 1,8 m do 3,0 m (od 5,9 de 90°, utilize o suporte de montagem rotativo SB01. do 9,8 stopy) od podłogi. W przypadku montażu płaskiego użyj co najmniej dwóch śrub (DIN 7998) w pozycjach A.
  • Seite 7 EV1000PI Series Installation instructions The European directive “Waste Electrical and Electronic Equipment” (WEEE) aims to minimise the impact of electrical and electronic equipment waste on the environment and human health. To conform with this directive, electrical equipment marked with this symbol must not be disposed of in European public disposal systems.
  • Seite 8 EV1000PI Series Installation instructions 6253-2A...

Inhaltsverzeichnis