Selecting The Stimulation Intensity; Ending Massage & Cleaning The Electrodes - SaneoLINE VITAL Bedienungsanleitung

Operating the SaneoVITAL

Selecting the stimulation intensity

Take note of your own perceptions!
You should clearly feel the current or stimulation
intensity, but it should not be an unpleasant
sensation and certainly not painful.
The stimulation intensity for Channel A and/or Channel B is
displayed on the left and/or right-hand side of the application
menu (unit: mA).
Please select the stimulation intensity
for Channel A using the ▲/▼ buttons to the left of the display
and for Channel B using the ▲/▼ buttons to the right of the
display.
Pressing the ▲ button briefly increases the stimulation
intensity by 1 mA for the relevant channel.
Pressing the ▼ button briefly decreases the stimulation
intensity by 1 mA for the relevant channel.
Massage is started.
Where the appropriate stimulation intensity was set and
not changed for a period of 15 seconds, the Lock symbol
appears in the display. The keypad is locked.
Where required, unlock the keypad by means of the ▼button,
e.g. to adjust the intensity.
Ending massage & cleaning the electrodes
The device automatically switches off when the treatment time
has ended. Treatment can be aborted at any time by using the
On/Off button.
Please do not remove the body surface electrodes before the
device has been switched off.
Use a damp, lint-free cloth to clean the electrodes after use.
This will increase the durability of the electrodes.
en
21