Connection Diagram - LEGRAND 4 306 93 Handbuch

This Camera Housing is constructed by die-cast aluminum alloy with powder coated finished and equipped with adjustable Fully-
Cable Managed Mounting Bracket.
Power source IEEE 802.3at Plus Compliant 30W PoE is provided.
The Product is CE certified, owns IP 65 environmental protection level and conform with RoHS regulations.

CONNECTION DIAGRAM :

HOUSING
Inner space for camera mount W100 x H90 x L275 mm
Dimensions
Adjust position and direction
160mm
Safety instructions
This product should be installed in line with installation rules, preferably by a qualified electrician. Incorrect installation and use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained
and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
CAT6
CAT5
cable
cable
PoE injector
PoE injector
OUT IN
CAT6
cable
230 VAC
230 VAC
SWITCH
SWITCH
Dimensions of bracket base
425mm
9
110mm
83mm
95mm
69mm
8mm
165mm