Manual Operation Mode - VIRUSKILLER VK 002 Benutzerhandbuch

· Blue LED – Air quality is GOOD
· Yellow LED – Air quality is NORMAL
· Red LED – Air quality is POOR
Note – When the unit is switched on the Indoor Air
Quality sensor (IAQ) takes 2 minutes to calibrate.
When power button is pressed, the product emits a
beep sound and begins to operate. If the product does
not operate, ensure the socket is plugged securely into
a live, properly grounded outlet of the correct voltage.

Manual operation mode

If you wish to stop automatic mode and manually operate the unit, press any button on
the main board or on the remote control. You may then operate the unit as shown below.
•
Increasing the Fan Speed
Press up button on main board (1) or
Press button of remote controller (2)
Fan speed will increase when the UP
button is pressed and the unit will beep.
FAN 1
FAN 2
FAN 3
Quiet mode
Normal mode
High-speed Mode
9