Software Installations - Agilent Technologies U2600A Serie Schnellstart Handbuch

Software Installations

N O TE
6
If you would like to use the U2600A Series DIO modules with the Agilent
Measurement Manager application software, follow the step- by- step
instructions as shown in the following flowchart.
• If you do not wish to specifically use the device with the Agilent
Measurement Manager software but to use it on other ADE (e.g. Agilent VEE,
LabVIEW, MATLAB or Microsoft Visual Studio), you can skip steps D and F in
the following flowchart.
• You may require to install IVI-COM driver before using the U2600A Series with
other ADE.
D. Install the Agilent Measurement Manager
F. Launch Your Agilent Measurement Manager
A. Check Your System Requirements
B. Install the Agilent IO Libraries Suite
C. Install the Hardware Driver
E. Connect Your Device to the PC
U2600A Quick Start Guide