Herunterladen Inhalt Inhalt Diese Seite drucken

Slave Mode; White Balance - afx light PROPAR6-HEX Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PROPAR6-HEX:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Color 58
Color 59
Color 60
Color 61
Color 62
Color 63
2. AUTO (AUTO PROGRAMS SETTING)
This mode runs the built-in automatic programs.
Press MENU to select AUTO mode and press ENTER.
Use the UP and DOWN buttons to select the built-in automatic programs.
Built-in auto: Pro 01 ~ Pro 10;
Built-in auto program speed: AUTOSP [ 001 ~ 100 ] (Slow – Fast)
In this mode, the device will be set automatically as the Master unit.
3. ADDRES (DMX ADDRESS SETTING)
Press MENU to select the ADDRES mode, press ENTER. Then use UP and DOWN buttons to set the
desired DMX address (ADDR 001 - 512)
4. DMX MODE (DMX CHANNEL MODE SETTING)
Use this mode to set the device to DMX controller mode with optional DMX channels.
There are 5 DMX channel modes to be selected.
Press MENU to select the DMX MODE, press ENTER. Then use the UP and DOWN buttons to set the
DMX channel modes.
6 Ch
8 Ch
12 Ch
HSV (H = Hue, S = Saturation, V = Brightness)
HSI (H = Hue, S = Saturation, I = Intensity)
Please refer to DMX VALUES chart for the channels detail.

5.SLAVE MODE

You can use this mode to set the unit to run as Master or Slave model
The unit default setting is "Slave"
Press MENU to select the Slave Mode, press ENTER. Use UP and DOWN to select the desired set-
ting: Master/ Slave.

6. WHITE BALANCE

This mode is for user to set the custom configurable setting of white balance.
Press MENU to select the White Balance mode, press ENTER.
Use UP and DOWN to select Balance [ Red ] / [Green ] / [ Blue ], press ENTER
Red [ 000 – 255], Green [ 000 – 255], Blue [ 000 – 255] display, use UP and Down to adjust the
numeric value.
Press MENU to save the setting and go back.
7. DIMMER (DIMMER CURVES SETTING)
Press MENU to Select Dimmer Mode, press ENTER, then use UP and DOWN to select the following
dimmer modes:
[ OFF ] (Linear dimmer mode, close dimmer curves, instant dimmer response)
[Curve 1 ] Dimmer curve1, Square Law dimming.
[Curve 2 ] Dimmer curve2, Inverse-square Law dimming.
[Curve 3 ] Dimmer curve3, S-Curves dimming.
EN
6
Red + Green + Blue + White + Purple
Red + Green + Blue + Amber + Purple
Red + Green + White + Amber + Purple
Red + Blue + White + Amber + Purple
Green + Blue + White + Amber + Purple
Red + Green + Blue + White + Amber + Purple
© Copyright LOTRONIC 2019

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Propar12-hexPropar18-hex

Inhaltsverzeichnis