Control Panel Operations - afx light PROPAR6-HEX Bedienungsanleitung

Dimmer Mode
Refresh Rate
Keys Lock

CONTROL PANEL OPERATIONS

1. STATIC (User Manual Static Colors Setting)
This mode allows the user to set the intensity of RED, GREEN, BLUE, WHITE, AMBER, PURPLE (UV)
separately to get endless color mixing from the control board without DMX controller.
Press MENU to select STATIC mode and press ENTER
"RED: xxx" is displayed. Press ENTER again. Use the UP and DOWN buttons to adjust the numeric
value (000-255), press ENTER, "GREE: xxx " is displayed. Repeat the above setting. Do the same for
BLUE/WHIT/AMBE/PURP and STROBE (Value 000-020)
Press MENU to save the setting and go back.
When you enter this mode, the device will be set automatically as the Master unit.
STATIC (Solid Colors Setting)
This mode offers 63 solid colors.
Press MENU to select Static Color mode. Press ENTER, then use the UP and DOWN buttons to se-
lect the desired solid colors. Your selection will be saved automatically.
In this mode, the device will be set automatically as the Master unit
Mode: Value:
Color 1
Color 2
Color 3
Color 4
Color 5
STATIC
Color 6
[solid]
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
EN 4
Dimmer Mode
[ OFF ]
[ Curve 1 ]
[ Curve 2]
[ Curve 3 ]
Refresh
[800HZ ]
[2000HZ]
[4000HZ]
[10 KHZ]
[20 KHZ]
[25 KHZ]
Lock
[No ]
[ Yes ]
Function:
Red
Green
Blue
White
Amber
Purple
Red + Green
Red + Blue
Red + White
Red + Amber
Red + Purple
Green + Blue
© Copyright LOTRONIC 2019