Technical Specifications - extol premium 8899007 Bedienungsanleitung

II. Technical specifications
Model/order number
Diameter of the melt glue stick
Glue dosage capacity
Fuel
Glue gun gas capacity
Operating time per single refill
Average gas consumption
Operating temperature
Heating up time to operating temperature
Weight without fuel
Max. ambient temperature for operation and storage
Dimensions
The operating time of the heat gun (gas consumption) per single tank depends on ambient temperature.
In a cold ambient environment, gas consumption will be higher and the operating time per single tank
shorter.
•
WARNING
y IMPORTANT: Carefully read this user's manual to acquaint yourself with the appliance, its use and how to
refill the gas. If you lend or sell the product to somebody, include this user's manual with it. Prevent this
user's manual from being damaged.
EN
8899007
11.2 mm
5 g/min
cigarette lighter gas
5 g (8 ml)
60-80 mins (average 75 mins)
3 g/h (41.62 W)
~ 150°C
approx. 1.5 mins
244 g
35°C
175 × 35 × 156 mm
38
III. Parts and control
elements
1 Glue outlet nozzle
2 Exhaust gases outlet
3 Hot melt glue stick
4 Handle
5) Glue gun gas tank refill valve
6) Gas inflow control mechanism
(for turning on/off)
7) Melt glue stick extension lever
(dosing of melted glue)
8) Stand
9) Ignition button
10) Flame presence verification window
IV. Filling the glue gun
with gas
SAFETY INSTRUCTIONS FOR FILLING
THE GLUE GUN WITH GAS
•
WARNINGS
y Fill the gas-powered glue gun with gas in a well
ventilated room with a sufficient supply of fresh
39
air, preferably outdoors away from any ignition
sources such as open flames, pilot burner, elect-
ric or gas heaters, electric cigarette lighters and
without the presence of other people. Do not
smoke when filling. Risk of fire or explosion! The
gas is highly flammable and explosive!
y Before filling the glue gun with gas, the glue gun
must be turned off and cooled down.
y Only cigarette lighter gas, commonly sold
in tobacconist stores, may be use for filling
the glue gun.
y When filling with gas, use safety glasses and
sufficiently thick leather gloves. When filling the
glue gun with gas, excess gas will be released,
which if it comes into contact with skin could
result in burns or cause eye damage as a result of
the extreme cooling effects of the gas resulting
from its evaporation. Due to the expansion of gas
in the refillable gas tank, the tank will be super-
cooled and this could result in skin injury due to
local supercooling - gloves must be worn.
y Refill the gas away from the face to prevent acci-
dentally spraying the face with liquefied gas!
y When using, handling and storing the
cigarette lighter gas container, follow the
safety instructions provided on the gas
container.
EN