Brickcom MD-100A Series Schnellinstallationshandbuch Seite 13

TM
V. If the camera supports the EasyLink function, the following page
will be displayed. Otherwise, this page will not be shown. *If desired,
click <Skip> to skip this setting.
TM
EasyLink is a unique Brickcom function which allows users to assign
a unique EasyLink name to their network camera's IP address. There
is no need to configure the router to open up ports or remember
hard-to-memorize IP addresses. Users can log onto
[uniqueEasyLinkname].mybrickcom.com to view the camera's web GUI
and live view.
1) Enter a unique EasyLink name whose length must be between 5-32
characters.
2) When finished, click the arrow button to continue.
13