Advanced Bionics Naida CI CI-5823 Handbuch Seite 7

9. If the Naída CI is already connected to the Listening
Check and paired to the AB myPilot, the AB myPilot
will switch to the Listening Check Menu screen once it
communicates with the Naída CI. This can be done by
briefly pressing the power button on the AB myPilot.
Once the Listening Check screen is shown, you can
use the left and right arrows to listen to the program
configurations and sound sources independently.
a. If you select T-coil, make sure you are synced to
either a loop or myLink. Provide input to the FM
transmitter to assess audio quality.
b. If you select Wireless, you will be listening to
whatever audio source is being streamed through
the ComPilot (i.e. Bluetooth device, FM, battery
operated device, etc). To begin the process, have
ComPilot turned on and the desired source
streaming. Be cautious and turn volume down on
any device that is directly connected to the
ComPilot. If listening to FM input, connect the
wireless FM receiver to the Europort located on the
ComPilot and synchronize it with the FM
transmitter. Provide input to the FM transmitter to
assess audio quality.
6