Advanced Bionics Naida CI CI-5823 Handbuch Seite 6

Connect the bottom of the Listening Check
Connect the supplied earbuds to the 3.5mm auxiliary jack
on the side of the Listening Check module.
7. Place earbuds in ears of unaided listener.
8. When the Listening Check module is attached, the
processor immediately enters listening check mode.
If you are not using an AB myPilot to select the input
sound source, you will be listening to the input sound
source configuration of the first program. If you would
like to listen to the other program sound source
configurations, use the program button to cycle
through the programs.
module to the power source.
5
6
5