Installing Computer In Panel - AB Quality VersaView 6181H Installationsanleitung

Installing Computer in Panel

To install the computer in a panel using mounting clips:
ATTENTION
1. Cut an opening in the panel using the appropriate panel cutout dimensions.
2. Make sure the sealing gasket is properly positioned on the computer. This
gasket forms a compression type seal, do not use sealing compounds.
3. Place the computer in the panel cutout.
4. Install the mounting clips. The mounting clips slide into the slots on the top,
bottom and sides of the computer.
Disconnect all electrical power from the panel before making
cutout. Make sure the area around the panel cutout is clear. Take
precautions so that metal cuttings do not enter any components
that are already installed in the panel. Failure to follow these
warnings may result in personal injury or damage to the panel
components.
VersaView 6181H Integrated Display Computers
Publication 6181H-IN001B-MU-P
11