INNOBIZ ventilia Bedienungsvorschrift Seite 7

en
3. Fit the capsule back into place and make sure you hear two clicks which
indicate that the capsule is well inserted.
The diffuser is now ready for use.
Reposition the metal disc by inserting the small metallic clip into the appro-
priate area.
Settings – fragrance diffusion modes
Press the diffusion button:
This button is located to the right of the product and is used for several
settings.
- Push once for: silent mode, low ventilation and multicoloured lighting
- Push twice for: normal mode, medium ventilation and multicoloured lighting
- Push three times for: booster mode, strong ventilation and dynamic lighting.
Diffusion will stop after 30 minutes.
Settings – lighting modes
During diffusion, when silent and normal mode is selected:
When the appliance is diffusing fragrance, the lighting has a default setting
of varied multicoloured light, you can then freeze the lighting on your desired
colour by pushing this button once: . Simply wait for your selected colour to
show up during the cycle and press the button at that moment.
To reselect the multicoloured setting, press the button once again. To switch
the lighting off, press this button for three seconds.
7