nedis BTMA110BK Kurzanleitung

a
Bluetooth Multi
Adapter
Intended use
The product is exclusively intended for playing
music from a Bluetooth device and for answering
and making hands-free phone calls.
Any modification of the product may have
consequences for safety, warranty and proper
functioning.
Main parts (image A)
1
AUX port
2
Next song / Volume up
3
Play / pause – Power
on / off – Answer call /
hang up
4
Previous song / Volume
down
Safety instructions
WARNING
-
• Only use the product as described in this manual.
• Be careful when using the product while driving.
Always focus your attention on the road.
• Do not expose the product to water or moisture.
• Do not expose the product to direct sunlight,
naked flames or heat.
• Do not drop the product and avoid bumping.
Connect to an audio output (image B)
To connect the product to an FM radio:
1. Connect one end of A
2. Connect the other end of A
AUX port.
Alternatively:
• Connect earphones to A
Pair a Bluetooth device
To pair a mobile device to the product, do the
following:
1. Press and hold A
the product.
- Voice feedback: "Pairing"
- A
5 flashes red and blue.
2. Activate Bluetooth on your phone and connect
with the product (BTMA110BK).
3. If asked, enter the pairing code '0000' .
- Voice feedback: "Connected"
- A
5
flashes blue.
The product can be paired to two Bluetooth
4
devices simultaneously.
When you switch the product on next time,
4
it automatically connects to the last paired
Bluetooth device.
The product powers off automatically 5
4
minutes after being disconnected.
Play music
The product can play music from the connected
Bluetooth device:
1. Play music from the mobile device that is
connected to the product via Bluetooth.
• Press A
• Press A
• Press and hold A
songs.
Answer phone calls
When a call comes in while playing music, the
4
product will automatically switch to telephone
mode.
When making a call, you must dial the number
4
on your phone. Once the call connects, you can
use the product's hands-free function.
Be careful when using the product while driving.
4
Always focus your attention on the road.
• To answer an incoming call, press A
• To reject an incoming call, press and hold A
for 3 seconds.
• During a call, press and hold A
to switch to private mode.
• To call the previous number, press A
Charge the product
When battery power is low, A
Voice feedback: "Low battery"
To charge the product:
• Connect A
• Connect the other end of A
- A
5 lights up to indicate that the product is
charging.
- A
5 turns off when the product is fully charged.
Specifications
Product
Article number
Power supply
Battery
Max. battery lifetime
Max. battery charging time
Wireless technology
Max. radio transmit power
Bluetooth frequency range
Bluetooth profiles
AUX output/input
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the
product BTMA110BK from our brand Nedis
produced in China, has been tested according to all
relevant CE standards and regulations and that all
tests have been passed successfully. This includes,
but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and
the safety datasheet if applicable) can be found
and downloaded via webshop.nedis.com/
btma110bk#support
For additional information regarding the
compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
Quick start guide
For more information see the extended
manual online: ned.is/BTMA110BK
3 to play or pause music.
or A
2 4
to A
9
5
6
7
8
9
to A
8
1
3
for 3 seconds to switch on
to control the volume.
or A
2 4
5
7 .
Bluetooth Multi Adapter
BTMA110BK
5 VDC / 2.0 A
Li-ion
4 hours
2 hour
Bluetooth
3 dBm
2402 - 2480 MHz
A2DP
AVRCP
HFP
3.5 mm stereo jack
BTMA110BK
Status indicator LED
Microphone
Micro USB port
Double sided 3.5 mm
plug
USB cable
1
.
8 to the radio's
.
to switch between
3
3 for 3 seconds
3
will blink.
9
to a power outlet.
4.2
®
.
3
twice.
,
®