Safety Instructions - IBIZA LIGHT LZR430RGB 15-1567N Bedienungsanleitung

MANUAL - LZR Laser Show Systems
This laser complies with the international standards EN60825-1:2014. It is meant exclusively for profes-
sional use.
Its installation and use should only be carried out by a skilled technician who is aware of the specific dangers
of lasers.
REMINDER OF SAFETY INSTRUCTIONS
Lasers of class 3 and 4 are for outdoor use only.
Inside the public area, any laser shooting towards the audience is strictly forbidden
except if a safety area of 5m radius is marked around the area to which the audience
cannot get access.
The area called "public area" is defined by the space of 3m above the area occupied
by the audience and a width of 2.5m around this area. The public area must be clearly
identified by signs on the ground.
Inside the public area only a scanning movement is allowed within the terms and conditions defined by the international technical laser
safety report.
The laser unit must be installed out of reach of the audience and at a minimum of 3m above the ground where the audience is present or
protected by a safety perimeter of 5m radius.
The laser unit must be installed in such a way that it can't be moved under the effect of disruptions such as crowd movements, vibrations
or gusts of wind.
EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to electro-
cution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
The unit complies with CE standards
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Don't stare into the beam
This unit contains high power laser devices internally. Do not open the laser housing, due to po-
tential exposure to unsafe levels of laser radiation. The laser power levels accessible if the unit is
opened, can cause instant blindness, skin burns and fires.
•
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
•
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
•
Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting
to is not higher than that stated on the decal or rear panel of the fixture.
•
This product is intended for indoor use only!
•
This unit must be earthed.
•
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfac-
es. Be sure that no ventilation slots are blocked.
•
Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse
size and type.
INSTRUCTION MANUAL
LASER FOR PROFESSIONAL USE ONLY
CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD

SAFETY INSTRUCTIONS

www.ibiza-light.com
EN
3