Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. IR LED
Set the camera IR LED light "Auto": the camera automatically adjusts the
brightness of the infrared light according to the status of the battery capacity
during the night. Under "Super fine "shooting mode, the IR LEDs will be the
brightest and the power consumption is high. Under "Economy" shooting
mode, the IR LEDs work in the weakest status, and therefore the power
consumption is low.
Remarks: It is recommended to set to "Auto" mode, because the camera will
adjust the IR LED light according to the battery capacity.
7. Timed shooting
Set the timed shooting of the camera. For example, if you want to observe
the flowering process of a plant, apply this function and set the interval
between each shot to record the whole process of flowering. Select timed
shooting, press OK button to open this menu, select "On" to pop up a time,
minute, second window to set up (when this function is turned on, PIR main
and sub sensors do not work).
8. Monitoring period
Set the camera time to work. Select the "Monitor Period", and then press the
OK button to select "On". You can set the start time and end time of the
camera. After the setting is completed, the camera will only work for the
sub-set time every day and the other time is in the standby state.
9. Date/Time
Set the camera date/time setting. Select "Date/Time option", press OK
button to pop up the settings dialog box. Press the Up/Down button to
change the number, press OK to confirm the current number and enter the
next setting option. For the year/month/day format: press the up and down
buttons to select the format (YY/MM/DD, MM/DD/YY, DD/MM/YY)
Time format: 12 or 24 hour system.
7
Werbung
