INVENTOR QLT-700 Bedienungsanleitung Seite 11

|Operating Manual
Trial operation
Note
• This appliance is provided with a disassembly protection function; the appliance can
only operate normally after the air inlet grill and air outlet grill are assembled properly.
• With the power on, each time after the machine starts, it enters the working mode
before the standby state.
• When powered on again after unexpected power failure (such as power failure at
home or the appliance is unplugged during normal operation), it automatically restores
to the working state where the power failure occurs.
1
Preparation
Power on for the first time, the display
panel flickers for 1s, and then the screen
is turned off. The whole appliance is on
standby state.
2
Switch
Press the ON/STAND-BY button
-Child Lock-
LIGHT ION (Press 3s) ON/STAND-BY
PM2.5 Auto Sleep Turbo SPEED MODE
(UV)
Outlet
Great Good Med Poor
Gaseous Pollutant
Great Good Med Poor
HEPA Filter Pre-Filter
EN
-Child Lock-
(Press 3s) ON/STAND-BY
LIGHT PM2.5 ION MODE
(UV) Auto Sleep Turbo SPEED
Outlet
Great Good Med Poor
Flicker
Gaseous Pollutant
Great Good Med Poor
HEPA Filter Pre-Filter
for 1s
ON/S ON/O
MODE MODE
3
Pre-heating
Outlet
Great Good Med Poor
Gaseous Pollutant
Great Good Med Poor
HEPA Filter Pre-Filter
The odor sensor is preheated, Great,
Good, Med and Poor status are displayed
alternately, and then it displays normally
after 1min.
Outlet
Great Good Med Poor
Gaseous Pollutant
Great Good Med Poor
HEPA Filter Pre-Filter
The particle sensor enters the preheating
state, PM2.5 value displays "---"; Great,
Good, Med and Poor statuses are
displayed alternately, and then it displays
normally after 15s;
4
Work
The purifier is powered on for the first
time and then enters the automatic mode.
-Child Lock-
LIGHT (Press 3s) ON/OFF
PM2.5 ION Auto Sleep Turbo SPEED MODE
(UV)
Outlet
Great Good Med Poor
Gaseous Pollutant
Great Good Med Poor
HEPA Filter Pre-Filter
Gaseous
pollutant
Great, Good, Med, Poor
Great, Good, Med, Poor
Auto Sleep Turbo
11