Troubleshooting - CANGAROO CRYSTAL Handbuch

B. DESCALING:
1. Pour 100 ml of vinegar and 200 ml of cold water into the reservoir in the base of the
appliance. Leave the solution until the lime scale dissolves. After that pour out the solution and
rinse thoroughly the reservoir. Leave the appliance to dry out before take it away for storage.
OR:
2. Mix one sachet with citric acid (10 gr) with 200 ml of water. Pour the solution in the reservoir
in the base of the device. Turn on the sterilizer and leave it to heat the solution for 1 – 2
minutes.
After that turn off and leave the device to cool out for about 30 minutes. Drain the solution and
rinse thoroughly the inner part of the reservoir and wipe dry.

TROUBLESHOOTING

Question Answer
You may have put too much water. Do not pour more than the
Water is leaking from the device.
recommended quantity of water in the reservoir.
White spots on the water Deposition of lime scale is normal and it happens faster in the
reservoir, the sterilizing body, the areas with more hard water. Clean the device regularly from the
tray or the lid lime scale.
Too much steam comes out from
Check if the lid is placed correctly on the tray.
the lid.
You may have poured too much water in the sterilizer. The actual
The sterilizing process takes too
sterilizing time is determined by the numbers of the articles in the
much time.
tray and the quantity of water.
The sterilizing process takes
You may have put less water in the sterilizer.
short time.
Manufactured for CANGAROO
Importer: Moni Trade LTD
Address: Bulgaria, Sofia, quarter Trebich, Dolo str. No. 1
Tel.: 00 359 2/ 936 07 90
14