CANGAROO CRYSTAL Handbuch Seite 13

Rated Voltage:
Power:
Included Accessories:
 Fig. 1 – Display:
1.With the bellow listed abbreviations are marked the icons of the functions of the product:
АМ – Automatic mode; SM – Steam sterilization mode; DM – Drying mode
2.Button „Mode": for choosing of the working mode. There are 3 working modes: автоматичен
режим automatic mode (steam sterilization + drying); steam sterilization; drying mode. The
default mode is the automatic mode. Turn on the sterilizer and the Mode button will flash for
about 5 seconds. Choose the working mode by pressing once the button. Press Mode button
to turn off the sterilizer.
3.Button "Time": to choose drying time. The options are 40, 50 and 60 minutes.
 On page 1 on Figure 2 are shown the separate parts of the product:
1.TC – Transparent cover
2.PS – Pacifier shelf
3.C – Body of the sterilizer
4.BS – Bottle Stand
5.B – Base of the sterilizer
6.F – Filter
7.FC – Filter cover
 ATTENTION! If you do not clean the basis of the sterilizer from scale deposition every week, as
described in "GUIDELINES FOR CLEANING AND MAINTENANCE", the product will not function
normally! We recommend you to use boiled or filtered water in the device to decrease the risk from
scale deposition.
 This sterilizer can fit up to 6 standard neck bottles from any brand, as well as other baby feeding
items, for e.g. feeding bowls, cups and spoons.
 The product can be used and for sterilizing accessories, which come into contact with milk – such as
breast pump.
А. Automatic mode – Figure 3:
1.Measure exactly 140 ml filtered water and pour it in the reservoir in the base of the unit.
2.Attach the bottle stand to the base of the sterilizer and then the body of the sterilizer. Place the
bottles upside down on the bottle stand.
3.After that attach the pacifier shelf to the main body and place in it the pacifiers and other small
accessories. Make sure that all parts, which you want to sterilize, are disassembled and are placed
with the openings facing down in order to avoid their filling with water.
Note: Clean the bottles and other items before sterilizing them.
4.Place the transparent cover and plug the supply cord.
5.Press the Mode button. The indicating light will turn on and the automatic mode will be activated by
default.
6.After finishing the sterilization, the 60 minute drying function will activate automatically.
MODEL AND ACCESSORY
220V
660W
Measuring cup
COMPONENTS OF THE APPLIANCE
INSTRUCTIONS FOR USE
Rated Frequency:
Power during Drying function:
Item No.:
50Hz
145W
XD-D202
12