Honeywell HW100 Anweisungen Und Warnhinweise Seite 24

HOW TO REPLACE THE SAFETY PLATE
1. From inside the helmet, push the lock latches to release the lens frame per View 1.
2. Pull out the lens frame from helmet per View 2.
View 1
3. Replace the external safety plate by pulling it out of the lens frame and inserting a new safety plate
per View 3.
4. Push down lower latches to release ADF, pivot the ADF up and remove it from the helmet per View
4.
External Safety Plate
View 3
Tigerhood Book.indb 9
Latches Lens frame
View 2
ADF
Latches
View 4
GB_AU_NZ-9
3/14/13 4:36 PM