Gigabyte AERO 15 Kurzanleitung Seite 2

Using GIGABYTE Notebook for the First Time
1
Connect the power cord to the AC adapter.
1
Connect the AC adapter to the DC-in jack on the right side of the notebook.
2
Connect the power cord to the power outlet.
3
Switching on the Power :
After you turn on the notebook for the very first
time, do not turn it off until the operating system
has been configured. Please note that the volume
for the audio will not function until Windows® Setup
has completed.
IMPORTANT:
Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the first time.
●
When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and easily accessible.
●
Locate the input/output mark on your Notebook PC and ensure that it matches the input/output rating information on your power
●
adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU.
Power adapter information
●
- Input voltage: 100-240Vac
- Input frequency: 50-60Hz
- Rating output voltag 19.5V, 11.8A
Full User Manual
For more user guide and software instruction, please refer to the below link:
https://www.gigabyte.com/Support
* Product specifications and product appearance may differ from country to country.
We recommend that you check with your local dealers for the specifications and appearance of the products available in your country.
* Although we endeavor to present the most accurate and comprehensive information at the time of publication,
we reserve the right to make changes without prior notice.
SS
DCIN
2
3
1