Electric Power - LG CRN-8240E Bedienungshandbuch

ELECTRIC POWER

I Using the power from your notebook PC (through the interface card)
If the supplied interface cable/card is used between your notebook PC and CD-ROM
drive, you can operate the CD-ROM drive using the power from your notebook PC (you
do not need to connect the AC adaptor). The power for your CD-ROM drive will be
automatically supplied when the notebook PC is turned on. The DC/PC switch of the
CD-ROM drive must be set to the PC position.
Notes :
• Depending on the performance of computer's power supply, the computer may not
be able to supply enough power to the CD-ROM drive. At that time, the CD-ROM
drive may not be able to operate with full performance. In this case, use the supplied
AC adaptor.
• When using the power from a PC, the data transfer rate has a maximum of 7x
speed.
• Do not change the DC/PC switch when the PCMCIA CD-ROM is powered on.
I Using the power from supplied AC adaptor
To use the AC adaptor set the DC/PC switch to the DC position. The DC indicator will
light. In this case, the data transter rate has a maximum of 12x speed.
E-12