Herunterladen Inhalt Inhalt Diese Seite drucken

Radio Mode - Clatronic mc 1026 Bedienungsanleitung

Plattenspieler mit radio
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Headphone Socket
Please use headphones with a 3.5 mm stereo jack plug; these should be inserted
into the PHONES socket. The loudspeakers are then switched off.
Switch-off
The device is switched off when the function selector switch (1) is turned to the
OFF position and the mains switch (21) is turned off (OFF). Unplug the device.
1. Turn the function selector switch (1) to the TUNER position.
2. Select the desired frequency band with the band selection switch (6).
Medium wave = AM (mono)
3. Tune in the desired station with the station adjustment knob TUNING (2).
4. If reception is poor for an FM Stereo station and the station rustles, try to im-
prove reception by turning, winding and unwinding the antenna or by modifying
its length. If it does not improve, switch to FM (VHF mono).
5. An aerial is integrated into the device for the reception of AM stations. The
machine can be aligned to the station by turning it. In this frequency band
programs are transmitted in „mono" only.
1. Push the function selection switch (1) to PHONO.
2. Open the hood (7) by pulling the lid on the front upwards.
3. Place a record on the turntable (11) on the central spindle (10) and through
the aperture (16) on the rear of the hood. If you are using a 45 rpm single, fi rst
GB
place the adapter (puck) (12) on the central spindle.
4. Release the catch on the pick-up arm support (14) and remove the stylus
protector.
5. Select the appropriate speed with the speed selection switch (13).
6. Place the pick-up arm carefully on the external edge of the record with the help
of the guide lever (15). The turntable begins to rotate automatically.
7. AUTO STOP ON/OFF switch (20): At the end of the record the turntable stops
rotating automatically if you have turned the AUTO STOP ON/OFF switch on
the back of the device to „ON".
With some records it is possible that the turntable stops rotating before the end
of the record is reached as the switch off end is located outside the radius. In
this case turn the AUTO STOP ON/OFF switch to „OFF".
8. When you have fi nished listening to records place the pick-up arm carefully on
the support (14), lock the catch and replace the stylus protector.
34
6....-05-MC1026 34

Radio Mode

VHF = FM
Using the Record Player
VHF Stereo = FM ST.
25.10.2005, 11:01:15 Uhr

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis