1 POWER/FUNCTION
Function selector switch
(PHONO/OFF/TUNER)
2 TUNING control
3 VOLUME control
4 PHONES Headphone connection
5 Station scale
6 BAND Band selector switch
(FM ST/FM/AM)
7 Hood
Reverse
17 AC ~ Mains connection
18 LINE OUT connections
19 ANT FM throw-out aerial
•
Read the operating instructions thoroughly before the start-up!
•
Select an appropriate location for the device and loudspeakers. An example of
an appropriate location is a fl at (horizontal), dry, non-slip surface on which it
can be operated without diffi culty.
•
Make sure that the device is adequately ventilated!
Power supply
•
Insert the plug into a properly installed 230 V, 50 Hz power socket. Please
ensure that the mains voltage corresponds to the information on the type plate.
•
If you are not going to use the device for a prolonged period, please remove
the mains plug from the socket or switch the device off by the mains switch
(21) (OFF).
POWER/FUNCTION (1)
(PHONO/OFF/TUNER): Switches the unit to „ready for operation" or to „off".
Volume:
PHONES (4):
LINE OUT (15):
6....-05-MC1026 33
Overview of the Components
Start-up of the device/Introduction
General Operation
You can set the desired volume using the VOLUME
control (3).
Insert the plug of a set of headphones into the headpho-
ne socket – the loudspeakers are „muted". If your head-
phone plug does not fi t, please use a suitable adapter.
For connection to the AUX IN sockets of an existing
stereo system.
8 FM ST Control lamp
9 Loudspeaker
10 Central spindle
11 Turntable
12 Adapter for 45 rpm
singles (puck)
13 33/45 Speed selection switch
14 Pick-up arm support/catch
15 Guide lever
16 Aperture
20 AUTO STOP ON/OFF
21 Mains switch ON/OFF
GB
33
25.10.2005, 11:01:14 Uhr