Device Functions - Navitel R600 Gps Bedienungsanleitung

26 | USER MANUAL

Device functions

Format SD-card
EN
Record
Capture
Video
Photo
Record audio
Lock file
Loop recording
G-sensor
Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD
card or in case of data error, please format the microSD card. For formatting the SD-card in Menu mode select Format
SD-card and confirm it.
Connect the device to an external power supply and it will start recording automatically. Press the OK button to stop
recording. Press OK again to record another video. Each video will be saved automatically.
In Record mode (STBY), press the Power button to enter Capture mode, press the OK button to take a photo (it will
be saved automatically).
In Record mode (STBY), press the Power button twice to enter Video mode; press the Up and Down buttons to select
a file; press the OK button to play a file. During playback, press OK to pause/unpause; press the Up and Down keys
to fast forward/rewind.
In Capture mode, press the Power button twice to enter Photo mode; press the Up and Down buttons to select a file;
press the OK button to play a file.
Record video with or without sound.
In Record mode (REC), press Power to protect the current recording. A key symbol will appear at the bottom of the
screen. In Video / Photo mode, select a file, press Menu and select Protect, then Lock Current or Lock All. Protected
files cannot be deleted or overwritten. Select Unlock Current / Unlock All to remove protection.
This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of
space, the unprotected files will be overwritten in the order in which they were created.
If the vehicle is hit by something, the DVR will automatically lock the current video.