Nauta miniK10 Bedienungsanleitung Seite 19

4.3 Opening lock (locker mode) (Open the lock with the same user code used to close it)
Step
1. Enter the user code, for example 1-2-3-4
Turn the knob to the open position and the lock is open.
4.4 Closing the lock (locker mode) (Close the lock with any chosen user code)
Step
1. Enter the user code, for example 1-2-3-4
Turn the knob to the locked position and the lock will close.
4.5 Forgot code (single user mode)
Step
Open the lock with the service code
Open the lock with the master code
Or
Or Set the user code back to the factory code.
The user code is now back to 1-0-1-0.
Now, change the user code back to your personal code.
4.6 Forgotten user code (locker mode)
Step
Open the lock with the service code
Or Open the lock with the master code
5. Programming the lock
The lock can only be programmed with a master code.
Use one of the codes from the table on the next page to program the lock as desired.
Example: changing the lock from single user mode to locker mode
Step
1. Enter master code
2. Enter 1-1 for locker mode
You will hear a long beeping sound and the green light will turn on.The lock is now set to locker mode.
On the next page, read in detail what the various options entail.
Action
Action
Action
Action
Action
(The green and red lights will turn on)
Key
1-2-3-4
Key
1-2-3-4
Key
*servicecode#
#mastercode#
#mastercode* 4-0
Key
*servicecode#
#mastercode#
Key
#mastercode*
1-1
19