comfortel D-400 Betriebsanleitung Seite 11

The system displays a message that it is searching for provisioning files.
The telephone's IP address is shown at the top of the display, on the right,
at the same time.
3. Write down the IP address.
Note: Then make these settings:
• Use the ▲▼ arrows or touch the screen to navigate in the list.
• Enter numbers and characters, either using the keypad or the screen
keyboard.
• Press the OK key
Configuring the language and location
1. Press Country.
2. Select Phone language.
3. Configure the language for the telephone (here: English).
The menu language changes.
4. Select Location.
5. Set the telephone's location.
6. Select Webserver language.
7. Configure the language for the configuration manager.
8. Press Back
You return to the initial configuration.
9. To make more configuration settings, do one of the following:
• Press WebUI to enable Access > Web administration (https). You can
now conveniently configure additional settings in the Configuration
Manager. See Opening the Configuration Manager.
• Press Cancel to configure additional settings on the telephone. See
Configuring an identity on the telephone.
Initial configuration is closed.
Configuring an identity on the telephone
1. Select
You access a list of unconfigured identities.
2. Open an unconfigured identity.
3. Then enter the data that is then listed, which differs depending on the
operating mode.
Note: To enter numbers, either press and hold down the number keys
or use the screen keyboard.
SIP
Username
SIP
Registrar
Password
.
> Settings > Identity.
PBX
The internal number
configured for the telephone
Example: 100
The PBX's IP address
Example: 192.168.123.123
The associated password
to confirm your selection or entry.
VoIP provider
The username configured for
the account
Example: telephonenumber@Provider.co.uk
The VoIP provider's URL
Example: Providername.co.uk
The associated password