DJI RONIN-S Bedienungsanleitung Seite 6

Method 2:
The External GPS Module can also be mounted on the optional Ronin-S Top Hotshoe
Bracket.
1. Place the Cheese Plate onto the Top Hotshoe Bracket and insert the M4 screws.
2. Insert the M4 screws from underneath the Cheese Plate, and place the External
GPS Module (the side with the DJI logo facing outward) onto the Cheese Plate.
Make sure to align the two screws with the holes on the back of the External GPS
Module. Turn the screws until the External GPS Module is secure.
3. After mounting, connect the CAN Bus cable on the External GPS Module to the
Ronin-S 12V/2A Accessory Power Port.
Make sure the CAN Bus cable is inserted correctly to avoid damaging
the port.
DO NOT cover the External GPS Module during use.
Other equipment can connect to the CAN Bus port on the External GPS
Module.
4