General Precautions; Maintenance; Warranty - Berner 216073 Bedienungsanleitung

GENERAL PRECAUTIONS

The selection and use of components have been carried out taking into account the operating conditions
and life span of the machine. Install the machine in such a way as to avoid any danger to exposed
personnel provided that it is properly used. No protection or warning will be ever sufficient if the operator
fails to take certain precautions, if the machine is not maintained in the best operating conditions and if the
following recommendations are not complied with.
Before starting work, learn how to use and adjust the machine correctly. Check that the operator works
safely and thoroughly knows the operation of the machine.
Avoid exposing yourselves and anybody else to unnecessary risks. Insist on having personal protection
systems used wherever prescribed. Do no remove, modify or inhibit any SAFETY DEVICE installed by the
manufacturer, and check that they are not removed or rendered less effective. Constantly check that the
equipment is perfectly efficient without any anomaly which might damage persons or things.
Work in tidy, risk-free premises with adequate lighting and room. Keep any unnecessary tools or other
objects away from the working area.
INSTALLATION
Install the cable coiler in the places provided by the regulations in force concerning electric systems and
work environment. Fix the cable coiler to wall, ceiling or floor according to the installation diagrams by
means of suitable screw anchors or screws to be fitted into the appropriate holes on the brackets. The
electric connection shall be carried out by skilled personnel.
Provide before the machine an amperometric protector which breaks all the phases and whose
characteristics coincide with the maximum load shown on the label. Further use of the cable reel may
be impaired when exceeding the maximum load.
INSTRUCTIONS FOR USE
The cable coiler is equipped with a spring for cable winding. This mechanical device is constantly in
operation; therefore make sure that both during winding and unwinding the cable is accompanied during its
movement and NEVER left free.
If used on an automatic machine, appropriate guards shall be installed in order to prevent any damage to
persons or things in the event of any cable or spring breakage.
The cable coiler is provided with cable blocking device at every turn of the coil.
When working with cable unwound and ratchet stop on, make sure that the cable is not accidentally
touched (the catch may be released and the cable may wind up uncontrolledly).

MAINTENANCE

Periodically check the perfect efficiency of the cable and that no cut or abrasion has occurred on the
insulator which might affect insulation or functionality. Clean the cable by means of a cloth soaked in hot
water to remove dirt and incrustations and guarantee a perfect rewinding.
Do not use any detergent or solvent which might turn out to be incompatible with the cable coiler materials.
In the event that an intervention on the electric or mechanical parts should be necessary or the cable
should be replaced, call a licensed assistance centre.
Any disassembly carried out by unskilled personnel might entail serious risk mainly due to the pre-loaded
spring.

WARRANTY:

- 12 months from the purchase date.
- The warranty consists of free repair or replacement of the parts that, in our final judgment, are materially
or operationally defective.
- Any other form of indemnification is excluded.
- Replacement or repair of parts subject to operating wear is excluded.
- Transportation expenses at buyer's charge.
- The warranty is not applicable when the device is damaged due to misuse.