Philips QC5130 Bedienungsanleitung Seite 3

1 Disconnect the appliance from the mains and let
the appliance run until the motor stops.
2 Remove the hair clipping comb and the cutting unit.
3 Remove the 2 screws at the back of the appliance
with a screwdriver (Fig. 18).
4 Pull the back panel off the appliance (Fig. 19).
5 Remove the 6 screws on the inside of the appliance
with a screwdriver (Fig. 20).
6 Separate the power unit from the front
panel. (Fig. 21)
7 Cut the wires close to the batteries and then
remove the batteries (Fig. 22).
Guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at www.philips.
com or contact the Philips Consumer Care Centre
in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Consumer
Care Centre in your country, go to your local Philips
dealer.
3 4222.002.8072.2