Kasanova MONTALATTE Bedienungsanleitung Seite 10

10 MILK FROTHER
28. When mixing hot liquids, take care to avoid splashing any hot liquid that could
cause burns.
29. Do not remove the lid & measuring cap in using.
30. Always leave the appliance to cool down before cleaning.
31. This appliance can be used by children aged from 8 years and above if they
have been given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved. Cleaning and user maintenance
shall not be made by children unless they are older than 8 and supervised. Keep the
appliance and its cord out of reach of children aged less than 8 years.
Appliances can be used by persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
32. Children shall not play with the appliance.
33. Regarding the detailed information on how to use the accessories, refer to the
paragraph "instructions" in this manual.
34. It is essential to keep this appliance clean since it is in direct contact with food.
35. Regarding the instructions for cleaning surfaces (notably in contact with food),
thanks to refer to the paragraph "advice for care & storage" in this manual.
36. Children must be kept under supervision to ensure that they do not play with the
appliance.
37. Switch off the appliance and unplug it from the power supply before changing the
accessories or handling or getting near to any of the parts that move during opera-
tion.
38. Always unplug the appliance from the power supply if left unattended and before
assembling, dismantling or cleaning.
39. Improper use may result in injury.
40. Do not allow any liquid to spill over onto the connectors.
41. The appliance is only to be used with the stand(motor unit) provided.
42. The heating element surface is subject to residual heat after use.
INSTRUCTIONS
1. Before first use
Remove the product and accessories carefully from their original packaging. Check
whether the contents of the packaging are complete and not damaged. Please
return the product if the contents of the packaging are incomplete or if any damage
is found.
1 Place the power base on a dry, even, stable pad.
2 Unwind the power cord until it reaches the desired length.
3 Connect the mains plug to a suitable mains power outlet socket.
4 Clean the product and frothing attachment before using it for the first time in order
to remove any manufacturing residue.