Herunterladen Inhalt Inhalt Diese Seite drucken

Descrizione Dell'apparecchio; Pannello Di Controllo; Description Of The Appliance - Indesit H8 Serie Gebrauchsanleitungen

Kühl-/gefrierkombi
Inhaltsverzeichnis

Werbung

Descrizione dell'apparecchio

Pannello di controllo

1. ON/OFF
Premendo questo tasto è possibile accendere l'intero prodotto (sia
vano frigo che vano freezer).
2. Regolazione Temperatura FRIGORIFERO
Consentono la modifica dell'impostazione della temperatura del
frigorifero, con relativa conferma sul display della temperatura
selezionata.
3. Display FRIGORIFERO
Indica la temperatura impostata nel vano frigo.
4. Allarme
E' stata registrata una situazione di allarme nel prodotto (vedi sez.
Anomalie e rimedi).
5. Display CONGELATORE
Indica la temperatura impostata nel vano congelatore.
6. Regolazione Temperatura CONGELATORE
Consentono la modifica dell'impostazione della temperatura del
congelatore, con relativa conferma sul display della temperatura
impostata.
7. SUPER FREEZE +
Grazie alla funzione Super Freeze + è possibile
congelare nell'apposito vano (vedi immagine sotto) anche cibi
appena cotti ( a temperatura di 70°C). Questa fase di congelamento
avviene 50% più velocemente di quanto avverrebbe in un freezer
standard
ottenendo, quindi, benefici immediati sulla consistenza del cibo, i
cui tessuti sono ulteriormente preservati, ed evitando proliferazione
batterica.A congelamento ultimato la temperatura torna al livello
programmato.
Si consiglia per ottenere un migliore risultato,
di attivare la funzione 1 ora prima dell'effettivo
inserimento del cibo all'interno del vano freezer di
introdurre i cibi all'interno dello scomparto freezer
solo all'uscita della funzione.
La funzione ha una durata massima di 24 ore.
8. ECO*
Gestisce l'attivazione e la disattivazione della funzione
ECO (la temperatura ottimale a consumi minimi).
L'ottimizzazione dei consumi avverrà dopo 24h
dall'attivazione della funzione All'attivazione di questa
funzione, sulla tastiera si accende il LED ECO. La
pressione prolungata per 8 sec del tasto ECO farà
lampeggiare il led relativo e permetterà la regolazione
della temperatura nel vano Frigo e nel vano Freezer.
Dopo Due minuti dall'ultima interazione con l'utente,
il display entra in modalità risparmio energetico.Per
uscire dalla modalità risparmio energetico è sufficiente
premere un qualsiasi pulsante o aprire la porta frigo.
8.
ACTIVE OXIGEN*
Il dispositivo si attiva premendo l'apposito tasto
dedicato presente sul display (porta frigo).
Tenendo premuto il pulsante Active Oxygen per 8
secondi è possibile attivare la funzione ECO.
9. HOLIDAY
Consente di attivare o disattivare la funzione HOLIDAY
(sulla tastiera si accende il LED HOLIDAY) e sul
display del frigorifero e del congelatore vengono
visualizzate rispettivamente le temperature +12°C
e -18°C. Dopo due minuti dall'ultima interazione
con l'utente, il display entra in modalità risparmio
energetico (vedi funzione ECO).
10. SUPER COOL
Consente di attivare o disattivare la funzione SUPER
COOL (raffreddamento rapido sia di cibo fresco che
di cibo appena cotto). Sulla tastiera si accende il LED
SUPER COOL e sul display del frigorifero.
11.GOOD NIGHT
Grazie alla funzione Good Night è possibile ridurre al
minimo il rumore, garantendo sempre le prestazioni
di conservazione.Il compressore funziona alla minima
velocità impostabile.All'attivazione della funzione il
display va in stand-by,accendendosi solo la relativa
icona del Good Night. La funzione Good Night può
disattivarsi automaticamente dopo un tempo massimo
di 6ore o dopo che si sono verificate delle condizioni
tali che non è più consentito garantire le performance
del prodotto con la funzione attivata. La funzione può
essere disattivata manualmente con una ulteriore
pressione sul tasto o spegnendo il dispositivo (è
consigliabile attivare la funzione nelle ore notturne o
ridurne l'interazione al fine di non uscire rapidamente
dalla funzione).
*
Presente solo in alcuni modelli.
6

Description of the appliance

Control panel
1. ON/OFF
The entire product (both the refrigerator and freezer compartments)
may be switched on by pressing this button.
e
2. REFRIGERATOR
Used to modify the temperature setting of the refrigerator; confirmation
corresponding to the selected temperature appears on the display.
3. Refrigerator display
Shows the set temperature for the refrigerator compartment.
4. ALARM
An alarm situation has been detected in the product (see
Troubleshooting section).
5. FREEZER display
Shows the set temperature for the freezer compartment.
6. FREEZER
e
Used to modify the temperature setting of the freezer; confirmation
corresponding to the selected temperature appears on the display.
7. SUPER FREEZE
Thanks to the Super Freeze + feature you can freeze in the suitable
compartment (see image below) "just cooked" foods (at a temperature
of 70°C). This freezing phase happens 50% faster than it would happen
on a standard freezer, and this offers immediate benefits on the food
consistency. Food tissues are further protected and bacterial growth
is avoided.At the end of the freezing process the temperature reverts
to the programmed level.
In order to get better results, we recommend that you enable this
feature 1 hour before you start inserting food inside the freezer
compartment.
1
10
2
3
4
5
6
7
8
9
11
and
temperature adjustment
and
temperature adjustment
This feature works for max. 24 hours.
8. ECO*
Controls the activation and deactivation of the ECO
function (optimal operating temperature for minimal
energy consumption). Consumption will be optimised
24h after the function was enabled. When this function
is activated, the ECO LED on the keypad lights
up.Press and hold the ECO button for 8 seconds so
that the corresponding LED begins to flash; this will
allow you to set the temperature to in the Refrigerator
compartment and in the Freezer compartment. Two
minutes after the most recent user interaction, the
display enters its energy saving mode.To exit the
energy saving mode, simply press any button or open
the refrigerator door.
ACTIVE OXIGEN*
8.
Device is activated pressing the dedicated key on the
display located in front of the fridge door.
By holding the Active Oxygen button for 8 seconds
you can enable the ECO feature.
9. HOLIDAY
Activates or deactivates the HOLIDAY function (the
HOLIDAY LED on the keypad lights up), while the
temperature values +12°C and -18°C appear on the
refrigerator and freezer displays respectively. Two
minutes after the most recent user interaction, the
display enters its energy saving mode (see ECO
function).
10. SUPER COOL
You can enable or disable the SUPER COOL feature
(quick cooling of both fresh and just cooked food).
On the keyboard the SUPER COOL LED turns on as
well as on the fridge display.
11. GOOD NIGHT
The Good Night function makes it possible to minimize
any noise, at the same time ensuring suitable storage
performance.
The compressor will be working at the minimum speed
that can be set.
When you start the function, the display enters into
standby mode and the relevant Good Night icon
lights up.
The Good Night function can automatically stop either
after maximum 6 hours or after the performance of
the product with the function ON can no longer be
ensured owing to a number of different reasons.
To stop the function manually press the button again
or switch off the device - we recommend starting
the function in the night hours or minimizing any
interaction with the fridge to prevent the function from
stopping automatically.
*
Available only on certain models.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis