Inhaltsverzeichnis
Werbung
Put the main switch on the I or II position to turn on the lamp.
Put the main switch on the 0 position to turn off the lamp
HoW To cHarGe
Put the main switch located on the handle on the "0" position. Connect the
power cord of the transformer to the power supply jack (next to the red LED).
Then connect the transformer to the electrical plug.
The red LED switches ON: the device is charging.
WARNING: the red LED does not show the charging level of the battery.
The product may become slightly warm during charging
FUNcTioN PoWerbaNK
To recharge the connected device, please put the
lateral switch on the
(USB) position.
Connect the USB cable (not included) to the device
you want to charge (mobile phone / tablet...),
then to the USB jack situated on the side of the
lamp.
TriPod adaPTor
The spotlight is supplied with a screw that allows the mounting on any
tripod.
In accomplishment of the Directives 2002/95/CE, 2002/96/CE and
2003/108/CE, relating to the reduction of the usage of dangerous
materials into the electronic , electric appliances and also to the
waste disposal. The symbol of the crossed bin which is on the device
or on the packaging signifies that the product at the end of its working life
must be collected separately from the other waste materials. Therefore, the
user will have to give the appliance at the end of his life to the appropriate
centers for the separate collection of electronic and electro technical wastes, or
give it back to the retailer while purchasing a new device of equivalent kind. The
appropriate separate collection for the following sending of the unused
appliance to the waste recycling, to the treatment and to the disposal
compatible with the environment contributes to avoid possible negative
effects on the environment and on the health and contributes the reuse and /
or recycling of the materials with which the appliance is made of. The
unauthorized disposal of the product by the user involves the application of
the sanctions based on current regulations of law. For further information
related to the collecting systems contact local competent authorities.
GuARANTEE cONdITIONS
Attention: the guarantee is not valid without the receipt or the invoice
GUaraNTee cLaUSeS
1.
The product is guaranteed for 60 months from the date of
purchase against defects in materials and manufacturing
2.
Excluded from the guarantee are: the esthetic components, the
batteries, the knobs, the LEDs, the bulbs, removable parts subject
to wear, damage due to negligence, use, incorrect installation or
installation not in accordance with the warnings in the instruction
Manuale_R920.indd 5
manual or however caused by phenomena outside the normal
operations of the product. In particular, and as an example, note
that the cutting of the power cord of the transformer or the fact
of forgetting to recharge the lead batteries of the products which
use them invalidate the guarantee.
3.
The guarantee is invalid if the product has been tampered with or
repaired by unauthorized personnel.
4.
Guarantee means the substitution or repair of components
identified as defective from manufacturing including the labor
costs.
5.
On behalf of Velamp Industries srl discretion, the entire product
can be substituted by the same model or an alternative product,
without constituting any guarantee extension.
6.
Compensation for either direct or indirect damage of any nature
to persons or things, for the use of or the suspension of use of the
product is excluded.
7.
The client is responsible for any transportation fees and risks.
F PHare Led recHarGeabLe
reF. r920 - TraiNSPoTTiNG
aVerTiSSeMeNTS iMPorTaNTS
• Lire attentivement les avertissements. Pour tout problème s'adresser à
la société Velamp ou à des techniciens spécialisés.
• Velamp décline toute responsabilité pour toute mauvaise utilisation de
ce produit.
• Protéger de l' e au et de la pluie.
• Toute opération d' e ntretien ou de nettoyage devra être effectuée avec le
produit débranché du réseau d'alimentation.
• Ce produit contient une batterie au plomb qui peut être nuisible pour
l' e nvironnement : respecter les normes en vigueur pour l' é limination
de la batterie.
• La première fois que le produit est utilisé il doit etre chargé complète-
ment ( 24 heures ): Ne pas laisser la lanterne déchargée plus de 3 mois,
sous peine d' e ndommager le produit.
• La température d'utilisation est comprise entre 0° et 40°C
• LED non remplaçable.
• Le transformateur utilisé doit avoir les caractéristiques suivantes: Vout
: 7,5V, Imax : 350mA avec sortie à très basse tension de sécurité et
certificat de conformité avec les normes techniques en vigueur
caracTériSTiqUeS
Phare avec fonction anti black out : branchée au réseau la lampe s'allume
automatiquement en cas de coupure de courant si l'interrupteur principal est sur
la position I ou II. .
Alimentation: 220V ~ 50 Hz /12V • Batterie au plomb rechargeable 6V 4Ah
• Source lumineuse: 20W, LED CREE® XHP 50 • Temps de recharge : 14 heures •
Autonomie: 3/8 heures • Dimensions : 205x175x185 mm • Indice de protection
IP43 • Lumen: 1600 (lumière forte) 400 (lumière faible) • Faisceau lumineux :
visible jusqu'à >1500 m • Clignotant rouge de signalisation avec interrupteur
- 5 -
- 5 -
24/11/15 12:49
Werbung
Inhaltsverzeichnis
