5 Installation
To install the device, just connect the power supply and connect the input videos using BNC
coaxial cable.
The following instructions show how to install the optional hard disk and alarm contacts.
5.1 Connecting the hard disk
If an IDE hard disk (HDD) is connected to the quad, it is possible to record the video input
signals and choose the quality setting.
Hard-disk
"SLAVE"
connector
FLAT Cable
(gray)
"MASTER"
connector
(black)
DVR board
connector
(blue)
Power supply
connector
Page 6 of 22
MNVC4SRC_0648