Nike+ Heart Rate Sensor Handbuch Seite 5

Link the Heart Rate Sensor to your SportBand
1. Wrap the Heart Rate Sensor around your chest and
snap it into place. You may have to wet the two black
pads on the inside to ensure a good transmission.
Make sure no other shoe sensor or Heart Rate
Sensor is nearby.
2. Press and hold the Toggle button for 3 seconds. A
blinking LINK message will appear, followed by OK.
For more information on the Nike+ SportBand, see the complete
manual available at www.nikeplus.com/downloads.
3 sec
English 2