Specifications; Standard Accessories - Hitachi CR 18DMR Bedienungsanleitung

CAUTION ON LITHIUM-ION BATTERY
To extend the lifetime, the lithium-ion battery equips
with the protection function to stop the output.
In the cases of 1 and 2 described below, when using
this product, even if you are pulling the switch, the
motor may stop. This is not the trouble but the result
of protection function.

SPECIFICATIONS

Power Tool
Model
No-Load Speed
Stroke
Capacity
Rechargeable battery
Weight
Charger
Model
Charging voltage
Charging time
Weight
Charge time is approximate. Actual charge time may vary.
"x" Indicates that the battery pack is not compatible with that specific charger.

STANDARD ACCESSORIES

CR18DMR
CR18DL
1 Blade (No. 103) ............................................................................................................... 1
2 Hexagonal bar wrench ................................................................................................... 1
3 Charger (UC24YFA or UC18YG or UC18YRL) ........................................................... 1
4 Battery CR18DMR (2BLFK) (2HLFK), CR18DL (2MRK) .............................................. 2
5 Plastic case ....................................................................................................................... 1
18 V 2.0 Ah EB1820L: Ni-Cd (15 cells)
18 V 2.6 Ah EB1826HL: Ni-MH (15 cells)
18 V 3.0 Ah EB1830HL: Ni-MH (15 cells)
18 V 3.0 Ah EB1830X: Ni-MH (15 cells)
18 V 3.3 Ah EB1833X: Ni-MH (15 cells)
UC24YFA
7.2 – 24 V
2.0 Ah : Ni-Cd
2.6 Ah : Ni-MH
3.0 Ah : Ni-MH
3.3 Ah : Ni-MH
3.0 Ah : Li-ion
1
2
CR18DMR (BLFK) (HLFK), CR18DL (MRK) .................................................... 1
1. When the battery power remaining runs out (The
battery voltage drops to about 12V (CR18DL)), the
motor stops.
In such case, charge it up immediately.
2. If the tool is overloaded, the motor may stop. In
this case, release the switch of tool and eliminate
causes of overloading. After that, you can use it
again.
CR18DMR
0 – 2100 min -
Mild Steel Pipe: O.D. 90 mm
Vinyl Chloride Pipe: O.D. 90 mm
Wood: Depth 90 mm
Mild Steel Plate: Thickness 10 mm
3.8 kg
UC18YG
7.2 – 18 V
50 min.
65 min.
70 min.
75 min.
x
0.6 Kg
CR18DL
1
28 mm
x
x
EBM1830: Li-ion (10 cells)
x
x
3.4 kg
UC18YRL
7.2 – 18 V
50 min.
x
x
x
x
0.3 Kg
3
4
English
30 min.
40 min.
45 min.
50 min.
45 min.
0.6 Kg
5
8