Accessories; Pipa Series Infant Child Restraint; Mixx Pushchair Rain Cover; Mixx Pushchair Footmuff - Nuna Mixx Bedienungsanleitung

Switch Seat
The seat can be switched to face front or to face the parent.
Squeeze the seat release buttons (31)-1 while lifting the seat.
(31) Turn the seat to reverse direction, and then insert the seat
to seat mounts. (32)
Fold Pushchair
Please fold the canopy before folding the pushchair.
1
- Lift up on the folding buttons (33)-1 and push the
pushchair forward to fold. (33)-2
2
- The storage latch will automatically hook onto the storage
mount, then the pushchair is folded and locked completely.
(34)

Accessories

PIPA Series Infant Child Restraint

When using with the Nuna PIPA infant child restraint, please
refer to the following instructions.
1
- To attach adapters, place adapters onto mounts as shown.
A "click" sound means the adapter is locked. (35)
2
- To attach infant child restraint, place infant child restraint
onto adapter as shown (36), A "click" sound means the
infant child restraint is locked. (37)
3
- To remove infant child restraint, lift the infant child
restraint upwards (38)-2 while pressing the pushchair
release buttons. (38)-1
4
- To remove adapters, lift the adapters upwards while
pulling the release buttons. (39)
15 MIXX Stroller Instructions
If you have any problems using the infant child restraint,
please refer to the infant child restraint instruction manual.
Remove infant child restraint before folding.

MIXX Pushchair Rain Cover

To assemble the pushchair rain cover, place it over the
pushchair seat. (40)
Always check ventilation, especially in hot weather when
the rain cover is on the product.
Always check that the rain cover has been cleaned and
dried before folding.
DO NOT fold the pushchair after assembling the rain cover.
DO NOT place your child into the pushchair assembled
with rain cover during hot weather.

MIXX Pushchair Footmuff

The soft footmuff can provide your child with a warm and
comfortable environment.
Assemble the footmuff by following these steps.
1
- Place the footmuff over the seat after unzipping it, thread
the shoulder harnesses, waist harnesses and crotch
harness through respective slots. (41)
2
- Place baby into the footmuff, lock the safety buckle, and
then rezip the footmuff.
The assembled footmuff is shown as (42)
3
- Open the zipper to increase the space for footmuff. (43)
MIXX Stroller Instructions 16