Use As Intended; Safety Advices; Warranty And Liability; Location Of The Manual - BARBERI P27.T Betriebs- Und Inbetriebnahmeanleitung

EN - Operating and commissioning manual
2.

Use as intended

The fixed-value controller is intended to activate a mixer. Another application is not permissible and is consid-
ered as inappropriate.
The controller may only be installed and operated in:
dry, not explosive surrounding areas
closed rooms
rooms with a temperature between 0 °C and + 50 °C
3.

Safety advices

The controller corresponds to the appropriate safety regulations.
Danger to life due to electric shock!
Only trained, competent and authorised persons (electrical technician according to DIN VDE
1000-10 and BGV A3) are allowed to do mounting, electrical installation and commissioning,
maintenance and repair work on the controller!
Follow all local regulations of the responsible energy service providers!
Ensure that the power supply is switched off and that the controller cannot be switched on before
starting installation or repair work on electrical equipment.
Never work on current conducting parts!
Attention!
Never bring easily inflammable materials near to the controller!
Protect the controller against humidity, coldness, heat, dust and strong sunlight!
The controller is only allowed to be operated in perfect technical condition. Damages, that affect
safety or the proper functioning of the controller, have to be removed at once from competent and
authorised persons!
4.

Warranty and liability

All regulations about warranty and liability are defined in the general terms and conditions of the manufacturer
or in the particular contractual relationship. Warranty and liability claims are generally excluded in these cases:
if damages result of inappropriate use of the controller
if the housing had been opened unauthorised, unauthorised structural modifications or adjustments on the
controller software had been implemented
if the electrical technician had executed mounting or repair work improperly
if safety advices or instructions of this manual had been ignored
5.

Location of the manual

The operating and commissioning manual has to be handed out to the technician before mounting work is
started. It has to be stored in readable condition near to the controller in order to ensure quick access if
needed.
13
DANGER
!