Care And Cleaning - BioChef BCB-1000 Bedienungsanleitung

How to use
Icon Function
Cook
Hot Soup
Raw
Raw Hot
Create Condiments
Pesto
Nut Butters
Dips
Jams
Hummus
Chop
Fresh Produce
Soy Milk
Grind
Nuts
Grains
Coffee
Flour
Blend
Smoothies
Desserts
Cocktails
Raw Soups
Raw Chilled
Crush
Ice
Manual(BLENDER).indd 6
Operation Cycle LED Display
Blender will Increase to Time & Speed
speed 7 in 5 seconds, then
increase to max speed in
5-10 seconds, and keep at
this speed until finish.
Total duration is 8 minutes.
Blender will set speed at Time & Speed
8 for 2 seconds and stop
for 1 second. The program
then repeats this process
for 5 cycles. Finally, the
blender will run at max
speed for 45 seconds.
Total duration is 1 minute.
The blender will operate at Time & Speed
max speed for 30 seconds
and stop for 2 seconds;
Speed 6 for 10 seconds,
stop for 2 seconds;
The blender will repeat the
first two steps and finish.
Set on max speed 5 for Time & Speed
25 increase to high speed
H and run untill finish.
Total Duration 6 min
The blender will operate at Time & Speed
max speed for 35 seconds
and finish.
Total duration is 35
seconds.
The blender will operate at Time & Speed
max speed for 30 seconds
and stop for 2 seconds;
Speed 6 for 10 seconds,
stop for 2 seconds;
The blender will repeat the
first two steps and finish.

Care and Cleaning

LID, MEASURING CUP AND SEAL RING
Separate the lid and lid plug. Wash in warm soapy water, rinse clean under running water
and dry. Reassemble before use. To ensure continued and effective performance do not
put the container, lid or lid plug in the dishwasher.
JUG
1. Fill the container to half way with warm water and add a couple of drops of
dish washing detergent.
2. Securely connect the lid plug and lid to the top of the container.
3. Select speed 1 on your Speed Setting Keys and then select the ON/OFF
Function.
4. Slowly increase the speed setting to maximum speed.
5. Run the machine on high for 30 to 60 seconds.
6. Turn off your machine, and rinse and drain the container.
MOTOR BASE
1. Unplug the power cord from the wall outlet.
2. Clean the outside surface with a soft cloth or sponge. Do not immerse the motor
in water.
3. The centering mat can be removed for more thorough cleaning.
4. Polish with a soft cloth.
11/07/14 1:39 PM