Troubleshooting - Vooni VideoGrabber 3.0 Bedienungsanleitung

TROUBLESHOOTING

1. Before pressing the REC button, make sure that video source device (DV,
DVD player, VHS) is turned on and can supply audio and video signals to the
VideoGrabber 3.0 from Vooni.
2. Make sure that the A/V cables are correctly connected at both the source unit
and in the VideoGrabber 3.0 from Vooni.
3. If the software on the VideoGrabber 3.0 from Vooni seizes, the system can be rest
by pressing a needle or similar object into the little hole on the back of the unit.
4. Only use a memory card with a speed class of 10.
5. If the screen remains black in spite of having pressed the On/Off Menu button for
some time, the battery may be dead. Connect the charger and try again.
6. If you do not succeed in recording video to the VideoGrabber 3.0 from Vooni, the
cable connections may be plugged in incorrectly or be loose.
SYMBOLS ON THE SCREEN
Memory Card
Film
Available button alternatives
Press the On/Off Menu button to leave the
setting mode.
Press the OK button to save the selected
setting.
Battery indicator
Recording mode
Display mode
EN
19