Vooni VideoGrabber 3.0 Bedienungsanleitung Seite 13

RECORD:
1. Connect Vooni VideoGrabber 3.0 to the
video source.
2. Turn on the video source.
3. Turn on VideoGrabber 3.0 from Vooni.
4. Press the REC button to begin recording.
The counter at the top right of the screen
turns red.
5. Press PLAY on the video source to begin playback of your video film. The film
is now shown in the screen on the VideoGrabber 3.0 from Vooni. As the film is
recording, you can do the following:
Record the film without sound
Press the button. Press once more and the sound is recorded
again.
Take still pictures (snapshots)
Press the button. The still picture is automatically given a serial
number as a file name.
Record external sound
Connect the microphone to the MIC contact. The distance
between the microphone and the sound source approx. 10 cm.
6. Press the REC button to stop and save the recording.
EN
13