Remote Control; Start-Up Of The Device/Introduction; General Operation - AEG mc 4413 Bedienungsanleitung

Reverse Side
28 SPEAKER R/L Loudspeaker connections
29 Mains connection
30 FM ANT throw-out aerial
31 ON/OFF switch

Remote Control

1 ENTER/PLAY/PAUSE button
(Enter/Play/Pause)
2 STOP button
3 SKIP DOWN button (reverse search)
4 SKIP UP button (forward search)
5 REPEAT/PRE-UP button
(repeat/next radio memory preset)
6 MEMORY/PROGRAM button
7 RANDOM/PRE-DN button
(random/previous radio memory preset)
8 FUNCTION Function selector button
9 MUTE button
10 VOL -/+ buttons (volume)
11 Number buttons
(Direct selection of the track number)
12 ON/STANDBY button
13 FOLDER UP/BAND button
14 SLEEP button
(Function key for delayed switch-off)
15 TIMER button (Alarm Function)
16 EQ button
17 MONO/ST button (Mono/stereo switching)
18 INTRO button (Intro function)
19 MENU/SELECT button
20 BASS button (Amplify bass tones)
21 SNOOZE button (Wake-up interval)

Start-up of the device/Introduction

• Read the operating instructions thoroughly before the start-up!
• Select an appropriate location for the device, e.g. a dry, fl at,
non-slip surface on which the device can be easily operated.
• Make sure that the device is adequately ventilated!
• Connect the loudspeakers to the back of the music centre to
the sockets market „Speaker R and L" (28).
• Insert the plug into a properly installed 230 V, 50 Hz power
socket. The clock 00:00 appears, the display is dark. Please
ensure that the mains voltage corresponds to the informati-
on on the type plate.
• Unwind the FM dipole aerial (30) if necessary.
• The stored time and stations are lost as soon as the power
supply is interrupted.
Switching on (ON)
Turn the device on with the ON/OFF switch (31) on the back of
the device.
Switching off (OFF)
In order to turn the device completely off, turn the ON/OFF
switch on the back of the device to „OFF".
60
05-MC 4413 AEG 60
Setting the Time
1. Press the MENU/SELECT button once (19/19 on the remote
control). The words „TIMER" appear in the display. Then
press the II ENTER/PLAY/PAUSE button (14/1). The
hours fi gures start to fl ash.
2. Press the I SKIP/TUNING
buttons (8/3/4) to set the hours. Keep the button pressed
down until the desired hour is reached. Press the
ENTER/PLAY/PAUSE button (14/1) to confi rm.
3. The minutes fi gures start to fl ash. In order to set the minutes
press the I SKIP/TUNING
buttons (8/3/4). Keep the button pressed down until the
desired minutes are reached.
4. Press the II ENTER/PLAY/PAUSE button (14/1) again to
store the time.
NOTE:
It is possible to set the clock and the timer in both standby
mode and when the power is on. Press the MENU/SELECT
button (19/19 on the remote control).
Remote Control Batteries (not supplied)
• Open the lid of the battery compartment on the back of the
remote control.
• Insert 2 batteries of type LR3 „AAA" 1,5 V. Ensure that the
polarity is correct (see the fl oor of the battery compartment)!
• If the remote control is not used for a prolonged period,
remove the batteries in order to prevent battery acid leaking.
• Different battery types or new and used batteries must not
be used together.
CAUTION:
Batteries are not to be disposed of together with domestic
wastes. Dispose of the used batteries at the relevant collection
bin or at your dealer's.
WARNING:
Do not expose the batteries to high temperatures or direct
sunlight. Never throw batteries into the fi re. There is a danger
of explosion!
CD deck transport protection
Please open the CD compartment (11) by pressing the
OPEN/CLOSE (open) button (12). Remove the transport protec-
tion from the CD player if present before use.

General Operation

NOTE:
Some keys are to be found both on the device itself and
on the remote control. Keys with the same designation
have the same function.
ON/STANDBY (4/12)
Switch the device to the standby mode with the ON/STANDBY
button (4/12) (the time display appears, the display is dark). If
this button is pressed once more, the device switches on again.
I (SKIP DOWN/UP)
II
I (SKIP DOWN/UP)
04.07.2007, 14:23:26 Uhr