ENG
DESCRIPTION
Electric cord
USE
• Connect the plug to the socket-contact. The LCD display showsOFF.
• Turn on the hair straightener by pressing the power switch.
• The display shows a temperature of 180°C. You can set the temperature from 100°C to
230°C with the + or - buttons. The temperature is set in steps of 10°C.
• The appropriate temperature depends on your hair structure.
• Fine, porous, dyed or bleached hair: 100°C-160°C.
• Normal hair: 160°C-200°C.
• Strong, curly, hardy hair: 200°C-230°C.
• Remember that when you use the highest temperature, you must not treat the same
strand of hair more than once. Otherwise the hair could be damaged.
• If you press the + or - buttons for more than 2 seconds, the temperature setting is
locked. The LCD display shows LOC. This is a practical feature to lock the temperature
if the straightener is used for a long time.
• To lock the temperature setting, press + or - and keep the button pressed in until the
LCD display ceases to show LOC.
• If the straightener is turned on and is not used within an hour, it turns off
automatically. The LCD display shows SLP. Press the power switch if you want to use
the straightener again.
• Never leave the plug in the socket-outlet when the hair straightener is not in use.
• Always use the straightener on dry hair.
• Let the straightener cool down completely before you place it in storage.
• The straightener should be stored out of reach of children.
Tips! STRAIGHT HAIR. Place a 5 cm wide strand of hair between the straighteners and
press the handle together. Slowly pull the hair through from the roots to the tips.
4
Power switch
Cable suspension
Lock button
Ceramic coated straighteners
Temperature control
LCD-display