Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting The Speakers - Pioneer SC-1224-k Kurzanleitung

Av receiver
Vorschau ausblenden Andere Handbücher für SC-1224-k:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
Connecting up

Connecting the speakers

The receiver will work with just two stereo speakers (the front speakers in the diagram) but using
at least five speakers is recommended, and a complete setup is best for surround sound.
To achieve the comfortable surround sound, install your speakers as shown below.
7.1 channel surorund system:
R
L
SW
C
SL
SBL
Connecting the speaker cables
Make sure you connect the speaker on
the right to the right (R) terminal and the
speaker on the left to the left (L) terminal.
Also make sure the positive and negative
(+/–) terminals on the receiver match those
on the speakers.
1
Twist exposed wire strands together.
2
Loosen terminal and insert exposed wire.
3
Tighten terminal.
1
2
10 mm
6
L – Front Left
C – Center
R – Front Right
SL – Surround Left
SR – Surround Right
SBL – Surround back Left
SR
SBR – Surround back Right
SW – Subwoofer
Note
SBR
There are also other speaker connection
patterns (front height, front wide, etc.). For
details, see "Connecting your equipment"
of the operating instructions.
CAUTION
Before making or changing
connections, switch off the power and
disconnect the power cord from the AC
outlet.
These speaker terminals carry
HAZARDOUS LIVE voltage. To
prevent the risk of electric shock when
connecting or disconnecting the
speaker cables, disconnect the power
cord before touching any uninsulated
3
parts.
After installing the speakers, connect them as shown below.
Front Right
Subwoofer
(SW)
(R)
LINE LEVEL
INPUT
SUBWOOFER
PRE OUT
F HEIGHT/
SUBWOOFER
FRONT
CENTER
SURROUND SURR BACK F WIDE
1
(Single)
L
1
R
2
A
B
A
FRONT
CENTER
FRONT HEIGHT / FRONT WIDE /
SURROUND BACK
SURROUND
R
L
R
L
R
L
R
L
(Single)
SPEAKERS
2
A
FRONT
CENTER
FRONT HEIGHT / FRONT WIDE /
R
L
SPEAKERS
Surround Right
(SR)
Surround back Right
(SBR)
Note
When only connecting one surround back speaker, connect it to the SURROUND BACK L
(Single) terminals.
This unit supports speakers with a nominal impedance of 4
Center
(C)
PRE OUT
F HEIGHT/
FRONT
CENTER
SURROUND SURR BACK F WIDE
(Single)
L
R
B
SURROUND BACK
SURROUND
R
L
R
L
R
(Single)
Surround back Left
(SBL)
to 16 .
Front Left
(L)
A
L
Surround Left
(SL)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sc-1224-sSc-2024-sSc-2024-k

Inhaltsverzeichnis